Description
Part Description
This Grade A engine control module (ECM) was removed from a 2011 Toyota Camry with a 2.5L 4-cylinder engine, automatic transmission, and California emissions equipment. Pulled from a 52K-mile donor vehicle, this electronic control unit has been inspected for proper function and is currently on our shelf ready for immediate shipment.
The engine control module is the brain of your vehicle’s engine management system, controlling fuel injection, ignition timing, emissions systems, and overall engine performance. ECMs commonly fail due to electrical surges, water damage, or internal component degradation over time, causing symptoms like poor fuel economy, rough idling, stalling, or check engine lights that won’t clear.
At 603 Auto Salvage, we maintain over 50,000 quality used parts in stock from more than 1,100 vehicles. Our experienced team can help you find the exact ECM or any other component you need. Call us to verify compatibility with your specific vehicle or browse our extensive online inventory for additional Toyota parts. 50,000+ parts in stock from over 1,100 vehicles. Contact us or call (603) 392-7313 for anything you need.
Part Specifications
| Part | Engine Control Module (ECM) – 2.5L 4-Cylinder with California Emissions |
| Interchange # | 52693 |
| OEM Part Number | Contact for OEM# |
| Side | N/A |
| Part Grade | A — Grade A – Good working condition from 52K-mile vehicle, inspected and ready to ship |
| Warranty | 6-Month Warranty (Low mileage donor vehicle and critical engine component classification) |
| Type | Used OEM |
Vehicle Information (Donor)
| Year / Make / Model | 2011 TOYOTA CAMRY |
| VIN | N/A |
| Vehicle Stock # | 0611250789 |
Our Testing & Inspection Process
Every part at 603 Auto Salvage is inspected before listing. Here is what was verified on this Engine Control Module (ECM) – 2.5L 4-Cylinder with California Emissions:
| ✅ Connector Pins | All pins clean and undamaged, no corrosion detected |
| ✅ Housing Integrity | Case intact with no cracks or impact damage |
| ✅ Circuit Board | Internal components visually inspected, no burn marks or damage |
| ✅ Programming Status | Unit removed properly, ready for reprogramming to your vehicle |
| ✅ Part Number Verification | Confirmed correct application for 2011 Camry 2.5L AT California emissions |
Compatibility — What Vehicles Does This Part Fit?
Based on interchange #52693, this part fits the following vehicles. Always confirm fitment with your mechanic before purchasing.
| Year(s) | Make | Model | Notes |
|---|---|---|---|
| 2010-2011 | Toyota | Camry | 2.5L 4-cylinder with automatic transmission and California emissions |
| 2009-2011 | Toyota | RAV4 | 2.5L 4-cylinder engine with matching emissions package |
| 2011-2013 | Toyota | Highlander | 2.7L 4-cylinder applications may be compatible – verify part number |
| 2009-2010 | Toyota | Matrix | 2.4L applications with California emissions – confirm compatibility |
Questions? Need a shipping quote? Call us now:
603 Auto Salvage | 233 Main St, Plaistow, NH 03865
Mon–Fri 8am–4:30pm | Sat 8am–2pm | Sun Closed
Warranty & Shipping
Frequently Asked Questions
Does this ECM need to be programmed to my 2011 Toyota Camry?
Yes, this engine control module will need to be programmed by a Toyota dealer or qualified automotive locksmith to match your vehicle’s VIN and security system. Programming typically takes 1-2 hours and is required for proper operation.
What symptoms indicate I need a new engine control module?
Common signs include persistent check engine lights, poor fuel economy, rough idling, stalling, failure to start, or multiple error codes that return after clearing. A diagnostic scan can help confirm ECM failure versus other engine issues.
Will this ECM work on my Camry with different emissions equipment?
This specific unit is designed for California emissions systems. Federal emissions vehicles may require a different part number. Contact us with your VIN to verify exact compatibility before ordering.
How much does Toyota charge for a new engine control module?
New Toyota ECMs typically cost $800-1500 plus programming fees. Our used OEM unit offers the same functionality at a fraction of the cost while maintaining Toyota’s original specifications and quality.
Can I install this ECM myself or do I need a mechanic?
While the physical installation is straightforward, programming requires specialized equipment only available at dealerships or qualified shops. Most customers have the unit programmed professionally to ensure proper operation and avoid potential issues.
Related Parts & Resources
OEM Part Numbers & Cross-Reference
Looking for this part by number? Here are the reference numbers:
| Interchange Number | 52693 |
| Stock Number | 0611250789 |
| Engine Type | 2.5L 4-Cylinder |
| Transmission | Automatic |
| Emissions | California |
Price Comparison — Why Used OEM Makes Sense
| Source | Price Range | Warranty | Notes |
|---|---|---|---|
| Dealer (New OEM) | $800-$1500 | 1 year | Brand new, longest wait time |
| Aftermarket | $400-$800 | Varies | Non-OEM fitment, quality varies |
| Other Salvage Yards | $125-$200 | 30–60 days | Varies in quality and testing |
| 603 Auto Salvage | $75 | 6-Month Warranty | Tested, Grade A, ships in 24hrs |
Installation Notes
- Disconnect battery and wait 10 minutes before removing old ECM to prevent electrical damage
- Take photos of connector positions before disconnection to ensure proper reassembly
- Handle the unit by its case only – avoid touching connector pins or circuit board components
- Ensure all connectors are fully seated and locked before reconnecting battery power
- Have the unit programmed immediately after installation – do not attempt to start without programming
🔍 Free Fitment Check
Call us with your VIN and we will verify compatibility for free. No obligation, no pressure — just answers.
Our parts specialists check interchange data in real-time
Estimated Shipping Costs by Region
This part ships via FedEx Ground. Prices are estimates — call for an exact quote to your zip code.
| Region | Estimated Cost | Transit Time |
|---|---|---|
| New England (NH, MA, ME, VT, CT, RI) | $15 – $30 | 1–3 business days |
| Northeast (NY, NJ, PA, MD, VA) | $20 – $40 | 2–4 business days |
| Southeast (FL, GA, NC, SC, TN) | $25 – $45 | 3–5 business days |
| Midwest (OH, MI, IL, IN, WI, MN) | $30 – $50 | 3–5 business days |
| Southwest (TX, AZ, NM, OK) | $35 – $55 | 4–6 business days |
| West Coast (CA, OR, WA) | $40 – $65 | 5–7 business days |
Local pickup is always free. Free delivery within 30 miles of Plaistow, NH.
Why Buy From 603 Auto Salvage?
- 50,000+ parts in stock from over 1,100 vehicles on-site in Plaistow, NH
- Every part inspected before listing — no guesswork
- Family-owned salvage yard — real people, not a call center
- 6-Month Warranty on this part
- Fast shipping — most orders ship within 24 hours
- Competitive pricing — save 50–70% vs dealer prices
- Serving New Hampshire, Massachusetts & all 50 states
Ready to order? Call (603) 392-7313 or add to cart above. We are here to help.




Reviews
There are no reviews yet.